Thermometer for 2 external probes + 2x 0-5V inputs with display
Thermometer is designed for record of temperature. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.
The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.
For communication with the PC must be from Optional accessories ordered USB adapter, LAN adapter or COM adapter or start/stop magnet if is needed to control logging the other way than directly from computer.
-
codeS0541
-
Warranty3 years
- On request
Technical data
Operating temperature range
-30 to +70°C
Accuracy of temperature input without probe
±0.2°C from -50 do +100°C
±0.2% from reading from +100 to +260°C
±0.4% from reading from –90 to –50°C
±0.2% from reading from +100 to +260°C
±0.4% from reading from –90 to –50°C
Resolution of the reading
0.1°C
Accuracy of 0-5Vdc inputs
±0.2% FS
Real time clock
year, leap year, month, day, hour, minute, second
Data logging interval
adjustable from 10s to 24h
Display and alarm refresh
each 10 s
Total memory capacity
32000 temperature values in noncyclic logging mode
Data logging mode
noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
cyclic - after filling memory oldest data is overwritten by new
Dimensions
93x64x29mm
Power
Lithium battery 3,6V, size AA
Typical battery life
5 years
Battery life in continuous on-line mode with interval 1 minute
reduced to 70% of the above life
Battery life in continuous on-line mode with interval 10 second
1 year
IP protection
IP67 - protected against influence of temporary immersion into water
Weight including battery
130g
Warranty
3 years